Shopping Cart
0 item(s) - RM0.00

FLY 50A SBEC ESC

RM120.00  RM110.00
Save: 8% off

Free Shipping Within Malaysia

Feature:
Use powerful and high-performance MCU processor. The users can set function of use according to their requirements. It fully reflects the smart property of our products as a unique advantage.
Support unlimited rotate speed of brushless motor
Support the function of fixed speed
Delicate circuit design with strong anti-interference
The starting mode can be set. The response speed of throttle is very quickly and with very stable linear of speed regulation. It can be used in fixed wing aircraft and helicopter
Threshold values of low-voltage protection can be set.
With internal SBEC, the operating power to start steering engine is strong and the power dissipation is small.
Multi protection function: protection for abnormal input voltage/ protection for low battery/ protection for overheat/protection of lowing power when lost of signals from throttle
Good safety performance under energization: the motor will not start at the time of power on regardless of the location of pull rod of throttle in controller.
Protection for overheat: the output power will lesson to half when the temperature reaches 100'C during the operation of ESC. The output power will automatic recover when the temperature is under 100'C
Supports with operation setting for all controller and setting of programming panels
Set alarm sound. And judge the working situation after power on.

Electrical performance parameters of ESC:
Input Voltage:2-4 cells LiPo batteries  /5-12 cells NiMh batteries
Continuous current output:50A
The maximum allowable instantaneous current (10S):80A
BEC output::5.5V/3A(SBEC)

Shape and weight of ESC:
Dimensions (Length*Width*Height):70*32*17mm
Weight:68G
Positive and negative power wires: wire size 14#  Material: Copper Silicone Wire; Color:+ Red - Black; Length: 100 (mm)
UVW wire size: 14 #; Material: Copper Silicone Wire; Color: U Black V Blue W Red; Length: 80 (mm)
Signal wire: wire size: 24#; Length: 280 (mm); Connector specification: 3pin DuPont terminal
Types suitable for T head:     Rubber head Specification:D3.5*12      
Thrum heat shrinkable catheter specification: D4.5*20       Color: Red,White,Black
Heat sink specification: 29*40                                         Color: Silver
ESC heat shrinkable catheter tone specification:D35*80    Color Yellow

Parameter settings of ESC:
Brake Setting: On/Off, the default is off;
Setting for battery type: LiPo (lithium) or NiCd/ NiMh (nickel metal hydride / nickel at), the default is LiPo;
Low-voltage protection threshold setting: low / medium / high, the default is medium (3.0v/65%);
Motor timing setting (increase the efficiency and the start stability of the electronic governor): low/medium/ high, the default is medium (3.0v/65%);
Accelerated startup setting (for precision gearboxes and helicopters): (provide the rapid accelerated startup with linear throttle response), the default is soft;
Helicopter mode (for helicopters), the default is off;
Motor steering (clockwise / counterclockwise): forward steering / reverse steering, the default is forward steering;
PWM operating frequency: 8 KHz/ 16KHz, the default is 8 KHz;
Low voltage protection modes (lower power or stop immediately): lower power / immediately stop, the default is lower power

Standard configuration:
Power line length: 100 (mm)   UVW line length: 80(mm), no rubber head or T head   SBEC 5.5V/3A


Add to Cart:


This product was added to our catalog on Friday 13 April, 2012.

Your IP Address is: 54.83.230.41
Copyright © 2014 Emtech Hobby